Should I Buy A Tv Before Or After The Super Bowl

Radical workshop Reconstruction: Part 1

The CS-50 is certainly a good circular saw and I decided last year for lack of space for them. Unfortunately, the machine is delivered in its structure to be too soft to repeatedly accurate results. The angular accuracy of cuts depends on the wood and resulting from different feed forces. A format circular saw must therefore her! Also on the wish list is already longer a Jointer Planer . wood power has could fit these two new machines, and more recently in the program and it looks like these are the only "big" machines of this type along the small of my workshop. But how you get in general the two machines in a 3 x 5-foot workshop with the MFT / 3 and the cabinet shop for the drilling and milling, and reserves the bargain room for the planned official router table? Here is an approach in which the largest working lengths of the sliding table saw and jointer-planer is available:

The two stationary machinery stood opposite each other and would work in each direction 2.25m clearance. The brown rectangle of the MFT / 3 is thus moved under the window. The blue rectangle with the circle is the new portable suction. The proposed router table would be in in this case, the MFT / 3 is integrated. This approach might work because the work tables of the machines and the MFT / 3 are all on exactly the same height of 900mm and is therefore nothing in the way when processing large workpieces. On the left side of the room of the drill rig would be on his mobile cabinet and perhaps also movable assembly table.
I also put the full back with shifting plates because of the rising cold bothers me too but in the legs and the ground is unfortunately severely bent.
I will keep in any case to date and look forward to any suggestions.